The blister light box is a three-dimensional luminous word processing technology, which is made of acrylic material. It has the characteristics of high compressive strength, good light transmission, clear effect and durability, and is the first choice for many merchants. The blister light box is also a kind of light box, and it is also a common light box that is common in the streets. The shape can be small or large, but it can be gardened and has many specifications, giving customers a lot of choices. Whether it is day or night, it can achieve eye catching effects. The production process of the blister light box is not mentioned here. Next, the maintenance of the outdoor advertising blister light box can be divided into the following steps:
Workers must wear pure cotton white work gloves when disassembling the blister light box. Because there are oil, salt, acid, alkali and other ingredients in the sweat, it is corrosive. Sticking to stainless steel will slowly corrode the stainless steel surface, so that the stainless steel surface will slowly fade away from the old color, losing the original beauty and affecting the advertising effect.
The blister light box must be kept at 180 degrees when disassembling the outer frame. It should be handled with ease. It is forbidden to collide and twist. Put the outer frame flat on the ground; unplug the plug and disconnect the power supply (do not use the leakage protector as Use the power switch), then check the original electrical components (no live operation); require careful inspection, such as power cord entry holes, ballast input, output terminals, wires on the lamp holder, etc
The size of the blister light box must be consistent with the size of the light guide plate, not too large or too small, so as not to affect the display effect and heat dissipation inside the light box
When installing the outer frame of the blister light box, take it lightly, flatten it, hang it flat, then close the lower part of the light box and fix it with a hexagon socket screw;
Plug in the power plug and close the main power switch to see if the light is normal. If there is a phenomenon that one side is bright and not lit, please disconnect the power supply first, unplug the plug, and check the lamp socket wire, whether the lamp is loose or not; Whether the input and output wires of the ballast are loose, etc.
If the whole plastic light box is not bright, please check whether the leakage protector is closed, whether the wire connector inside the plug is loose, whether the pressure input and output connectors are loose, etc.;
Check whether the circumference of the plastic light box is loose, whether the tool is dropped, and then the work is completed.