There are many ways to create advertising light boxes. Different light box materials and different advertising screens make the advertising light box production process various and the performance effects are also different.
Common tools for advertising light box production: electric drill, cross screwdriver, dowel, hacksaw, wood saw, shovel hammer, pliers, small nails, latex, hook knife, wire saw, plexiglass glue. The advertising light box is made of plexiglass board surface or pvc board surface, plus reversal film or organic word or self-adhesive character, and is made up of fluorescent tube as light source and angle iron bracket.
The characteristics of light box advertising production: cheaper cost, easy to make, highlight the theme, bright and eye-catching, variety, no time limit, good publicity, deeply loved by users.
Advertising light box production points: 1, profile color processing: flashing silver, black, pure gold, porcelain white and other paint colors. 2. Structure: 45° angled, single side and four sides open Aluminum cover width 4cm The overall thickness of the light box is 2.8cm, and there are many other exquisite frames. 3, product specifications: 1.2m × 2.4m can be made in any size 4, product features: the product has thin, bright, uniform, provincial characteristics, thin - refers to the thickness of the small size, bright refers to the light source under the same power conditions High brightness, uniform - refers to the uniform light on the illuminating surface, eliminating the rickets of the traditional light box "ribbon phenomenon" 5, environmental standards: in line with the EU RoHs (SGS) CE CCC certification, the outer frame and other materials can be recycled 6. Safety Sex: LED light source is low-voltage safe, manufacturers strongly recommend the use of energy-saving concept LED light source.
Lightbox advertising production process: Design: Consider the design requirements of the amount of light, the size, color, and font of the primary and secondary arrangement of the graphic changes, horizontal and vertical. In addition, it depends on the installation site to develop the bracket. Calculate the size, font, and color of each word based on the design. Keel: generally a hexahedron. Ingredients: 20×20 or 30×30. Angle iron: Conditional self-processing, unconditional and external processing. Wood: Nail frame with 2 x 2 cm square wood. Cutting: four lengths and widths, the length and width are reduced by 0.5 cm = wood length. Two-headed saws 2 × 1 hoes, smeared with white latex and then nailed. The thickness is reduced by two material thicknesses + 0.5 = thickness length. Then apply white latex to the nails. Aluminum material: The aluminum alloy material used in the cabinet is constant in height, width and length. Saw it at a 45-degree angle and connect with a plug-in. An lamp: generally two or three fluorescent tubes. 40W 1.2 meters long tube, with a light box of 1.3 meters or more. The 30W lamp is 0.9 meters long and is used in light boxes above 1.1 meters. The thickness is generally 20-25 cm.